11mm Dovetail Scope Rings
Shipping & Taxes/Duties
Shipping is FREE to the USA on any order above $180. This includes all rings and bipod orders.
Shipping to Canada is $40USD.
Duties & Taxes - USA
US Customs and Border Protection may, at their full discretion, apply taxes and duties to imports above $800. If you are placing an order for $800 you should expect to pay import taxes and duties including but not necessarily limited to 3% for bipods and 17% for scope mounts, on any single order over $800.
Taxes and Duties are the sole responsibility of the purchaser. We cannot assist you to avoid these taxes as any interference by us could and most likely would be deemed unlawful and result in severe penalties for us and or cessation of supply in the USA.
Description
11mm Scope Rings
Tier One 11mm DOVETAIL scope mounts are precision made on 5 axis CNC machinery. They are the perfect mount for serious enthusiasts because they are lightweight, extremely accurate, and built tough.
ACCURACY IN MANUFACTURE
The key to making an accurate mount is to manufacture the product in as few operations as possible, on very high quality machinery.
By investing in cutting edge, 5 Axis CNC machines and advanced technology we have been able to cut the number of operations required from eight to two. This means there is no accuracy loss due to re-setting for different operations and we can complete each set of rings from the same solid billet.
If you were to stack your tolerances across each of your accessories and critical parts you may find that you actually have a very loose setup, and that leads to inaccuracy and poor performance.
With Tier One scope rings you can be assured that you have the very tightest tolerances possible, and a sturdy platform for repeatable performance. These rings are a perfectly matched pair and no lapping is required.
The big difference will be down range with tighter groups and more trophies.
MATERIALS
All Tier One rings are made from aerospace Aluminum 7075T6, an alloy with extreme toughness but with incredible weight saving advantages.
These 11mm dovetail rings are available in Medium and High configurations.
All hardware is stainless steel for strength and durability. We make our own screws in-house to ensure accuracy down to the finest detail.
All our rings are inspected and deburred after machining using a ceramic rumbler before being hard black anodised to a mil-spec 30 microns thickness.
DIMENSIONS - Height to Center Bore
30mm Medium = 28mm / 1.1"
30mm High = 33mm / 1.29"
34mm Medium = 28mm / 1.1"
Not recommended for Magnum or high recoil calibers.
WARRANTY
You also get our lifetime warranty on parts and defects, and our 30 day return policy.
SHIPPING
We ship everything by DHL Express - a fully trackable air courier service that delivers between 2-5 days from despatch. They are the fastest and the most reliable courier we could find.
Shipping is free anywhere in the USA mainland on orders over $180.
ABOUT TIER ONE
Tier One has been manufacturing the world's highest quality rifle scope mounts for over 12 years. We pioneered several products that are commonplace among shooters nowadays, including the popular Monomount and the first commercially successful Carbon Fiber bipods.
We manufacture from our own cutting-edge facility in the UK on extremely high quality CNC machines using the finest materials available anywhere. We supply military SF units, hunters, target shooters and precision rifle competitors.
We will continue to innovate and find new ways to improve your accuracy and precision through science and exceptional engineering. We will never cut corners.
Check out our other products and reach out if you have any questions.
11mm Scope Rings
Tier One 11mm DOVETAIL scope mounts are precision made on 5 axis CNC machinery. They are the perfect mount for serious enthusiasts because they are lightweight, extremely accurate, and built tough.
ACCURACY IN MANUFACTURE
The key to making an accurate mount is to manufacture the product in as few operations as possible, on very high quality machinery.
By investing in cutting edge, 5 Axis CNC machines and advanced technology we have been able to cut the number of operations required from eight to two. This means there is no accuracy loss due to re-setting for different operations and we can complete each set of rings from the same solid billet.
If you were to stack your tolerances across each of your accessories and critical parts you may find that you actually have a very loose setup, and that leads to inaccuracy and poor performance.
With Tier One scope rings you can be assured that you have the very tightest tolerances possible, and a sturdy platform for repeatable performance. These rings are a perfectly matched pair and no lapping is required.
The big difference will be down range with tighter groups and more trophies.
MATERIALS
All Tier One rings are made from aerospace Aluminum 7075T6, an alloy with extreme toughness but with incredible weight saving advantages.
These 11mm dovetail rings are available in Medium and High configurations.
All hardware is stainless steel for strength and durability. We make our own screws in-house to ensure accuracy down to the finest detail.
All our rings are inspected and deburred after machining using a ceramic rumbler before being hard black anodised to a mil-spec 30 microns thickness.
DIMENSIONS - Height to Center Bore
30mm Medium = 28mm / 1.1"
30mm High = 33mm / 1.29"
34mm Medium = 28mm / 1.1"
Not recommended for Magnum or high recoil calibers.
WARRANTY
You also get our lifetime warranty on parts and defects, and our 30 day return policy.
SHIPPING
We ship everything by DHL Express - a fully trackable air courier service that delivers between 2-5 days from despatch. They are the fastest and the most reliable courier we could find.
Shipping is free anywhere in the USA mainland on orders over $180.
ABOUT TIER ONE
Tier One has been manufacturing the world's highest quality rifle scope mounts for over 12 years. We pioneered several products that are commonplace among shooters nowadays, including the popular Monomount and the first commercially successful Carbon Fiber bipods.
We manufacture from our own cutting-edge facility in the UK on extremely high quality CNC machines using the finest materials available anywhere. We supply military SF units, hunters, target shooters and precision rifle competitors.
We will continue to innovate and find new ways to improve your accuracy and precision through science and exceptional engineering. We will never cut corners.
Check out our other products and reach out if you have any questions.