Adapters - Evolution Bipod
Shipping & Taxes/Duties
We ship via Fedex, UPS or DHL. Shipping times vary by region, but expect around 5 days from despatch.
All bipods are assembled to order - we must leave adhesives to cure before the bipod is shipped, and this will delay despatch by at least 24 hours.
We do not despatch on weekends.
Please be mindful of the time zone difference when ordering and calculating shipping times.
Shipping to Canada is $35USD.
Duties & Taxes - USA
US Customs and Border Protection may, at their full discretion, apply taxes and duties to imports above $800.
If you are placing an order for $800 you should expect to pay import taxes and duties including but not necessarily limited to 3% for bipods and 17% for scope mounts, on any single order over $800.
Taxes and Duties are the sole responsibility of the purchaser. We cannot assist you to avoid these taxes as any interference by us could and most likely would be deemed unlawful and result in severe penalties for us and or cessation of supply in the USA.
Description
These adapters are designed for use with the Evolution Tactical Bipod - they will not fit the FTR Bipod. Please see the below links to buy additional adapters for those products.
Reach Forward Pic Rail 6"
The Reach Forward Pic Rail 6" matches the screw spacing in Bergara stocks, but it can also be mounted to other stocks by simply removing your sling stud and drilling an additional hole in your stock to match the screw spacing on the rail.
This rail can be used as a reach-forward rail to create sufficient clearance at the end of your stock to mount the Evolution Bipod. This is particulaly useful if your sling stud screwhole is set far back from the end of your stock.
These adapters are designed for use with the Evolution Tactical Bipod - they will not fit the FTR Bipod. Please see the below links to buy additional adapters for those products.
Reach Forward Pic Rail 6"
The Reach Forward Pic Rail 6" matches the screw spacing in Bergara stocks, but it can also be mounted to other stocks by simply removing your sling stud and drilling an additional hole in your stock to match the screw spacing on the rail.
This rail can be used as a reach-forward rail to create sufficient clearance at the end of your stock to mount the Evolution Bipod. This is particulaly useful if your sling stud screwhole is set far back from the end of your stock.