Tactical Blaser Scope Rings (4 Screw)
Shipping & Taxes/Duties
Shipping is FREE to the USA on any order above $180. This includes all rings and bipod orders.
Shipping to Canada is $40USD.
Duties & Taxes - USA
US Customs and Border Protection may, at their full discretion, apply taxes and duties to imports above $800. If you are placing an order for $800 you should expect to pay import taxes and duties including but not necessarily limited to 3% for bipods and 17% for scope mounts, on any single order over $800.
Taxes and Duties are the sole responsibility of the purchaser. We cannot assist you to avoid these taxes as any interference by us could and most likely would be deemed unlawful and result in severe penalties for us and or cessation of supply in the USA.
Description
Tactical Direct Fit Scope Rings for Blaser R8
These purpose built precision scope mounts are designed to attach directly to your existing Blaser Saddle Mount replacing your standard rings.
The aggressive styling suits modern rifle shooting perfectly, and with 4 screws per ring cap they can secure any scope effectively and ensure no movement occurs. Now you can also mount accessory top rails on these rings - including short or RAPTAR rail variants.
The Tactical Blaser Scope Rings are lightweight, accurate and extremely tough - designed for the most demanding mountain hunts.
Heights
| Tube Size | Height to Centre Bore, From Top of Saddle |
| 30mm | 24mm (0.94") |
| 34mm | 27mm (1.06") |
| 36mm | 26mm (1.02") |
| 40mm | 25mm (0.98") |
Materials
7075T6 aluminium alloy for extreme strength and light weight.
Supplied with stainless steel ring cap screws and stainless saddle attachment screw, manufactured in house on our own machines for greater precision than.
Construction
Our one-hit machining method means all critical faces are machined in one operation. This prevents any accuracy loss in the machine usually caused by resetting for the next operation. You will notice the difference in the repeatability of the platform, the resistance to impacts and increased strength in the scope rings.
Each set of mounts is mechanically deburred in a 'bath' of ceramic cones to achieve a perfectly smooth finish on critical faces before anodising in hard black 30 micron thickness.
Mounting
The Blaser Scope Rings are designed to be mounted on Blaser's R8 saddle mount. Torque settings are available by the link at the bottom of this page.
Shipping
Please see the shipping tab on the main menu at the top of the page for all shipping information.
Specifications
- Manufactured from high grade 7075T6 aluminium
- No lapping required
- Attaches direct to Blaser Saddle Mount
- Sleek design to complement Blaser sporting rifles
- 30mm-34mm-36mm-40mm rings available
- Four screw ring caps for secure optic mounting
- Mill spec 30 micron hard anodised finish
- One hit machining to ensure repeatability
- Built in anti-cant bubble
- Supplied in hard plastic case complete with Torx bits
You also get our lifetime warranty on parts and defects, and our 30 day return policy for peace of mind.
Tactical Direct Fit Scope Rings for Blaser R8
These purpose built precision scope mounts are designed to attach directly to your existing Blaser Saddle Mount replacing your standard rings.
The aggressive styling suits modern rifle shooting perfectly, and with 4 screws per ring cap they can secure any scope effectively and ensure no movement occurs. Now you can also mount accessory top rails on these rings - including short or RAPTAR rail variants.
The Tactical Blaser Scope Rings are lightweight, accurate and extremely tough - designed for the most demanding mountain hunts.
Heights
| Tube Size | Height to Centre Bore, From Top of Saddle |
| 30mm | 24mm (0.94") |
| 34mm | 27mm (1.06") |
| 36mm | 26mm (1.02") |
| 40mm | 25mm (0.98") |
Materials
7075T6 aluminium alloy for extreme strength and light weight.
Supplied with stainless steel ring cap screws and stainless saddle attachment screw, manufactured in house on our own machines for greater precision than.
Construction
Our one-hit machining method means all critical faces are machined in one operation. This prevents any accuracy loss in the machine usually caused by resetting for the next operation. You will notice the difference in the repeatability of the platform, the resistance to impacts and increased strength in the scope rings.
Each set of mounts is mechanically deburred in a 'bath' of ceramic cones to achieve a perfectly smooth finish on critical faces before anodising in hard black 30 micron thickness.
Mounting
The Blaser Scope Rings are designed to be mounted on Blaser's R8 saddle mount. Torque settings are available by the link at the bottom of this page.
Shipping
Please see the shipping tab on the main menu at the top of the page for all shipping information.
Specifications
- Manufactured from high grade 7075T6 aluminium
- No lapping required
- Attaches direct to Blaser Saddle Mount
- Sleek design to complement Blaser sporting rifles
- 30mm-34mm-36mm-40mm rings available
- Four screw ring caps for secure optic mounting
- Mill spec 30 micron hard anodised finish
- One hit machining to ensure repeatability
- Built in anti-cant bubble
- Supplied in hard plastic case complete with Torx bits
You also get our lifetime warranty on parts and defects, and our 30 day return policy for peace of mind.