QD Cantilever Monomount
Shipping & Taxes/Duties
Shipping is FREE to the USA on any order above $180. This includes all rings and bipod orders.
Shipping to Canada is $40USD.
Duties & Taxes - USA
US Customs and Border Protection may, at their full discretion, apply taxes and duties to imports above $800. If you are placing an order for $800 you should expect to pay import taxes and duties including but not necessarily limited to 3% for bipods and 17% for scope mounts, on any single order over $800.
Taxes and Duties are the sole responsibility of the purchaser. We cannot assist you to avoid these taxes as any interference by us could and most likely would be deemed unlawful and result in severe penalties for us and or cessation of supply in the USA.
Description
QD Cantilever Monomount
This is the quick detach version of the Cantilever Monomount - a true one-piece scope mount, milled from a solid billet of 7075 T6 aluminium on high end 5 axis CNC machines.
All of our scope mounts are precision engineering for one-shot accuracy.
You will see improvements in accuracy, precision and true repeatability when using this state of the art Cantilever Mount, as a result of the advanced engineering processes used in it's manufacture.
Quick Specs:
Manufactured from aerospace Grade 7075T6 Aluminium
Large scope clamping area to withstand heavy recoil
Available in 30mm-34mm-35mm-36mm and tube sizes
Mil-Spec 30 micron hard anodised finish
Built in Anti-Cant bubble
Bolt on accessory rails available for ring caps and saddle
One Hit machining to ensure repeatability
Engineering
This precision mount has two defining characteristics that set it apart from other mounts on the market.
Higher Machining Tolerances:
By investing in state of the art CNC machines and refining our own machining processes we have been able to cut the number of operations required to mill a single mount from eight to two.
For you, the customer, this means there is no accuracy loss due to re-setting the machine for different operations and ultimately more precision and greater repeatability for fine tuning your setup.
- The QD Cantilever Monomount is machined to 3 microns tolerance; higher than any manufacturer anywhere in the world.
High-quality rifle manufacturers machine to 50 microns.
It is nearly impossible to achieve a tighter tolerance than this, and the result is a mount with perfectly matched critical faces, and increased strength and light weight.
Materials:
All rings are made from 7075T6 aluminium and are available in Low and Medium configurations.
The rings are finished in a Mil-Spec, hard coat, black anodise.
Sizes:
Available now in 30mm, 34mm, 35mm and 36mm.
These mounts will suit any standard 1913 picatinny rail.
Screws are stainless steel.
Weight:
The Cantilever Monomount weighs approximately 260g (9.17oz). This varies by model, so please ask if you require a specific weight.
The March Shorty QD Cantilever weighs 9.17oz exactly.
Shipping:
We offer shipping via DHL Express, tracked courier. Shipping time ranges from 2-6 days depending on your location. See our Shipping page for more information.
There is an option to insure your shipment at checkout.
Taxes:
The price shown is ex-duty. Duties may be payable in your country of origin.
Will These Fit My Scope?
Use the data sheet in the image carousel above to assess whether you will have enough clearance for your scope objective.
Every ring set is mechanically deburred in a 'bath' of thousands of ceramic cones to achieve a perfectly smooth finish before anodising in hard black 30 micron thickness.
MOUNTING
These rings are designed to be mounted to a standard 1913 picatinny rail. Torque settings for all of our rings are available on the data sheet below (see the link at the bottom of this text), these are also printed onto the bottom of each ring set.
We have many different types of rifle scope mounts available so if you require a different adapter type, ring size or height or a one piece scope mount please see our other products using the drop down menu above, or contact us with your questions.
LIFETIME GUARANTEE
We offer a lifetime guarantee on parts and defects, and you also have our 30 day return policy for peace of mind.
ABOUT TIER ONE
Tier One has pioneered shooting accessory designs since our inception in 2008. We have consistently developed innovative new products for the market and have always used the finest materials available in our products.
Our recent partnership with Zeiss USA is recognition of our years of hard work and quality in manufacture: We were chosen out of hundreds of manufacturers worldwide to design and manufacture Zeiss USA’s own line of scope mounts, available now on their website.
Tier One consistently pioneers carbon fiber products in the shooting industry, being responsible for one of the first and most commercially successful precision carbon fiber bipod designs. We have continued to develop and innovate the carbon fiber bipod and the result is the industry-beating Tier One Tactical Bipod.
DATA SHEET
MOUNTING INSTRUCTIONS
QD Cantilever Monomount
This is the quick detach version of the Cantilever Monomount - a true one-piece scope mount, milled from a solid billet of 7075 T6 aluminium on high end 5 axis CNC machines.
All of our scope mounts are precision engineering for one-shot accuracy.
You will see improvements in accuracy, precision and true repeatability when using this state of the art Cantilever Mount, as a result of the advanced engineering processes used in it's manufacture.
Quick Specs:
Manufactured from aerospace Grade 7075T6 Aluminium
Large scope clamping area to withstand heavy recoil
Available in 30mm-34mm-35mm-36mm and tube sizes
Mil-Spec 30 micron hard anodised finish
Built in Anti-Cant bubble
Bolt on accessory rails available for ring caps and saddle
One Hit machining to ensure repeatability
Engineering
This precision mount has two defining characteristics that set it apart from other mounts on the market.
Higher Machining Tolerances:
By investing in state of the art CNC machines and refining our own machining processes we have been able to cut the number of operations required to mill a single mount from eight to two.
For you, the customer, this means there is no accuracy loss due to re-setting the machine for different operations and ultimately more precision and greater repeatability for fine tuning your setup.
- The QD Cantilever Monomount is machined to 3 microns tolerance; higher than any manufacturer anywhere in the world.
High-quality rifle manufacturers machine to 50 microns.
It is nearly impossible to achieve a tighter tolerance than this, and the result is a mount with perfectly matched critical faces, and increased strength and light weight.
Materials:
All rings are made from 7075T6 aluminium and are available in Low and Medium configurations.
The rings are finished in a Mil-Spec, hard coat, black anodise.
Sizes:
Available now in 30mm, 34mm, 35mm and 36mm.
These mounts will suit any standard 1913 picatinny rail.
Screws are stainless steel.
Weight:
The Cantilever Monomount weighs approximately 260g (9.17oz). This varies by model, so please ask if you require a specific weight.
The March Shorty QD Cantilever weighs 9.17oz exactly.
Shipping:
We offer shipping via DHL Express, tracked courier. Shipping time ranges from 2-6 days depending on your location. See our Shipping page for more information.
There is an option to insure your shipment at checkout.
Taxes:
The price shown is ex-duty. Duties may be payable in your country of origin.
Will These Fit My Scope?
Use the data sheet in the image carousel above to assess whether you will have enough clearance for your scope objective.
Every ring set is mechanically deburred in a 'bath' of thousands of ceramic cones to achieve a perfectly smooth finish before anodising in hard black 30 micron thickness.
MOUNTING
These rings are designed to be mounted to a standard 1913 picatinny rail. Torque settings for all of our rings are available on the data sheet below (see the link at the bottom of this text), these are also printed onto the bottom of each ring set.
We have many different types of rifle scope mounts available so if you require a different adapter type, ring size or height or a one piece scope mount please see our other products using the drop down menu above, or contact us with your questions.
LIFETIME GUARANTEE
We offer a lifetime guarantee on parts and defects, and you also have our 30 day return policy for peace of mind.
ABOUT TIER ONE
Tier One has pioneered shooting accessory designs since our inception in 2008. We have consistently developed innovative new products for the market and have always used the finest materials available in our products.
Our recent partnership with Zeiss USA is recognition of our years of hard work and quality in manufacture: We were chosen out of hundreds of manufacturers worldwide to design and manufacture Zeiss USA’s own line of scope mounts, available now on their website.
Tier One consistently pioneers carbon fiber products in the shooting industry, being responsible for one of the first and most commercially successful precision carbon fiber bipod designs. We have continued to develop and innovate the carbon fiber bipod and the result is the industry-beating Tier One Tactical Bipod.